Fischer FIS EM Plus 390s Epoxy Mortar Resin 390ML 544155

Fischer FIS EM Plus 390s Epoxy Mortar Resin 390ML 544155

The fischer injection mortar FIS EM Plus 390 S is a high-quality epoxy resin mortar for maximum load-bearing capacity in cracked and non-cracked concrete. Alongside the injection mortar, the injection system consists of reinforcement steel, the approved components anchor rod FIS A and internal threaded anchor RG M I. The anchor rod FIS A can be set with variable anchorage depths. This enables the system to be ideally adjusted to the load to be supported. This optimises the use of materials. The epoxy resin mortar is suitable for fixings in indoor and outdoor areas such as shear connectors for concrete layers, high racks, or heavy-duty steel constructions. The approval of the injection mortar for use in glued laminated or glued solid timber of spruce (Picea abies), fir (Abies alba) or pine (Pinus sylvestris) allows the realisation of high-performance and appealing wood-wood, wood-concrete and wood-steel connections.

The FIS EM resin achieves very high load levels for safe use in cracked and non-cracked concrete.
 It is suitable for diamond-drilled drill holes, providing greater flexibility on the construction site.
 Low resin shrinkage allows for a maximum applied load, including large threaded rod diameters.
 FIS EM epoxy resin can also be used underwater.
Approved temperature resistance of -40°C to +72°C offers a stable load level, even when subjected to increased temperature demands.
 FIS EM has extended gelling times and is therefore particularly suitable for repeated installation

• Post-installed rebar connections
• Jointers for concrete layers
• Rim beam anchorings
• Seismic applications
• Anchorings in diamond-drilled or in waterfilled drill holes
• Heavy steel constructions
• Silo installations
• Tall shelving
• Sound barriers
• Temporary or removable fixings (with internal threaded anchor RG M I)
• Anchorings in sealing surfaces according to WRL (Water Ressources Law)
• Glued anchorages in wood, see approval for gluing in wood

Approved for anchorings in:

• Concrete C20/25 to C50/60, cracked and non-cracked
• Glued laminated or glued solid timber of spruce (Picea abies), fir (Abies alba) or pine (Pinus sylvestris)

Also suitable for:

• Natural stone with dense structure