Fischer 10x70 Concrete screw UltraCut FBS II ETA Approved (536859) 50 Pack

Fischer
SKU: 536859
55 In Stock
Regular Price £58.95 Sale Price Unit price: £0.00
Includes VAT

Fischer 10x70 Concrete screw UltraCut FBS II ETA Approved (536859) 50 Pack

Fischer Concrete screw UltraCut FBS II ETA Approved
The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.
Advantages
  • With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses.
  • The special saw tooth geometry enables fast cutting into the concrete.
  • Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
  • Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
  • The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
  • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
  • The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.
Applications
  • Guard rails
  • Consoles/Base plates
  • Metal profiles
  • Shelving systems
  • Protection barriers
  • Results / beam anchors
  • Temporary anchoring, e.g. of building site equipment
  • Shuttering props
  • Reinforcement of bridges
  • Rehabilitation of old and ailing buildings
  • Rehabilitation of car parks
Building materials
Approved for:
  • Concrete C20/25 to C50/60, cracked and non-cracked
  • Reinforcement of existing concrete structures
Also suitable for:
  • Concrete C12/15
  • Solid building materials
  • Masonry with a dense structure
You can find detailed information on building materials in the registration document.

Permission

  • ETA-15/0352
  • ETA-20/0321
  • DoP 0225
  • DoP 0227
  • DoP No. 0078
  • DoP No. 0146
Functionality
  • The UltraCut FBS II is recommended for the push-through installation.
  • Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
  • We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive.
  • The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper 

Technical Data

ETA-approval
DIBt-approval
Drill diameter 
d0
10 [mm]
Min. drill hole depth for through fixings 
h2
80 [mm]
Screw 
ds x ls
12 x 70 [mm]
Screw-in depth with fixture thickness 
hnom1 / tfix
55 / 15 [mm]
Screw-in depth with fixture thickness 
hnom2 / tfix
65 / 5 [mm]
Screw-in depth with fixture thickness 
hnom3 / tfix
 [mm]
Drive SW 15
Packaging Folding box
Amount 50 [pcs.]
GTIN (EAN-Code) 4048962251425




Need help with what you are looking for? Call any of our stores below to get expert advice in choosing the right product.